how to FLASH PS4 esp8266 NODEMCU windows

you will need:
a ESP8266 chip with 4MB Flash
A Micro USB cable
A Windows PC
A Bin File containing ESP8266 Firmware -download below

First download the correct drivers for your system, I got the driver for windows you can find it HERE

Download the correct Nodemcu-Pyflasher for your system. Im using the x64.exe, you can download it HERE if you do not know what one to download check in control panel (Control Panel\System and Security\System and look for System Type)

Install the correct driver for your system, run the installer, click next select "I accept the agreement" and next again, click finish.

Run NodeMCU-PyFlasher, select the serial port im using port 3, click browse and select your firmware.bin file you want to flash to your ESP8266, leave selected default Baud Rate ( 115200 ) and dual I/O (DIO), select to erase flash by clicking "yes, wipe all data" , finally click flash NodeMCU and wait. You can see the progress in the program, one you see done that's it your ESP8266 is ready to use.

THIS FIRMWARE IS XPROJECT ESP v1.5.2
SPECS:

Size 3MB! Original X-Project is 91MB:
GZ compression on every file and re-mapped for speed.
ESP Caching (cache in userguide or web or both if you want to use in both: takes under 30 seconds each!)
CONTAINS GTA V payloads APII V2 INTENSE 2.5 v 1.00 & 1.27 (smallest and most functional)

HOW TO USE THIS FIRMWARE ON PS4

Go to Settings > Network > Custom > WIFI-SSID = X-Project Host > Pass: 12345678 > IP: Auto > DHCP: Do Not Specify > DNS: Auto > MTU: Auto > Proxy: Do Not Use > Press O (no need to test connection).

TO USE: Open USER GUIDE, or WEB BROWSER and navigate to http://7.7.7.7/index.html.

FTP SERVER on this ESP .bin firmware:
FTP: 7.7.7.7
PORT: 21
USER: ESPFTP
PASSWORD:12345678

Connection to the ESP8266 FTP server needs to be passive, maximum 1 connection and encryption disabled.
You can also go THROUGH BROWSER to http://7.7.7.7/settings to CHANGE WI-FI pass.

DOWNLOAD ESP8266 firmware .bin xproject v1.5.2

thanks to defaultdnb